Showing posts with label storage. Show all posts
Showing posts with label storage. Show all posts

Wednesday, June 20, 2018

Is New Hampshire on the verge of battery energy storage history?


Is New Hampshire on the verge of battery energy storage history?

The only question left to be settled is a big one: Should utilities own behind-the-meter batteries?

A small investor-owned utility in New Hampshire may be on the verge of regulatory approval for one of the most ambitious U.S. tests yet of utility-owned, customer-sited battery energy storage systems.

In the process, regulators and stakeholders of the DE 17-189 proceeding are wrestling with a question of vital interest to the rest of the 3,000-plus U.S. utilities: Should a utility own customer-sited storage or is it a distributed energy resource (DER) that should be left to private sector providers?

Utilities have already seen the benefits that large-scale battery energy storage offers in shaving peak demand, providing grid services, and making systems more flexible. There is a clear opportunity to use customer-sited battery storage in the same way. But the question of how far utilities can intrude into markets so far served by private sector vendors must first be answered.

Vermont goes first

The only major U.S. utility-owned, behind-the-meter (BTM) battery storage is the Green Mountain Power (GMP) pilot project, according to GTM Research Energy Storage Analyst Brett Simon. GMP, the dominant Vermont electricity provider, is installing 2,000 behind-the-meter Tesla Powerwalls that will provide dispatchable energy and other grid services to New England’s wholesale electricity markets. Customers pay a one-time $1,300 fee or a monthly $15 fee to participate.

(https://www.utilitydive.com/news/is-new-hampshire-on-the-verge-of-battery-energy-storage-history/525876/

Tuesday, December 25, 2012

Concentrating Solar Power With Thermal Energy Storage Is Economically Useful For Utility Company Profits, Study Finds

Utility companies can benefit considerably from the utilization of concentrating solar power (CSP) and available energy storage methods, a new study from the US Department of Energy’s National Renewable Energy Laboratory (NREL) has found.

A CSP that possesses a 6-hour storage capacity works well to lower peak net loads for the part of the day when the sun isn’t shining. That’s “enough to add $35.80 per megawatt hour to the capacity and operational value of the utility, compared to photovoltaic (PV) solar power alone, and even higher extra value when compared to CSP without storage. The net load is the normal load minus variable renewables such as photovoltaic and wind.”

The thermal storage creates additional value because it allows CSP to replace the gas-fired generation that is used during peak loads and is more expensive, and also because it works to even out the solar power generation throughout the day, rather than a big bump during the day and big drop-off at night.



This study is one of the first where “the operational and capacity value of CSP with thermal storage has been evaluated using a production cost model, a traditional utility planning tool,” NREL writes.

The researchers used Energy Exemplar’s PLEXOS simulation model to specifically isolate the value of thermal energy storage (TES) with and without storage relative to other generation methods.

“We’ve known for a long time that CSP with storage adds significant value, however, we are now able to quantify this value in the language utilities understand,” said Mark Mehos, manager of NREL’s Concentrating Solar Power program. More

Given the amount of solar energy that SIDS and many tropical and sub-tropical countries have this is a most logical policy. Editor




 

Thursday, December 13, 2012

Grid Could Run on 99.9% Renewable Energy By 2030

When a British energy minister argued that wind turbines generate a "mere trickle of non-storable energy", some eyebrows were raised.

Sure, there are challenges to shifting to clean energy, but with renewables providing an ever larger slice of the energy pie and with a number of studies showing 100% renewable energy is possible with today's technologies, his arguments were at best outdated, and at worst a severe case of misrepresentation and denial.

Now Science Daily reports on a study from the University of Delaware and Delaware Technical Community College adds weight to this thesis, suggesting that wind and solar could power the grid 99.9% of the time if combined with a certain amount of energy storage and fossil fuel backups for the rare occasion that clean energy alone was not enough.

Using computer modeling, the researchers explored 28 billion combinations of renewables and storage mechanisms, each tested with four years of weather and energy demand data. The results were encouraging, and because the study focused not just on matching supply with demand, but rather achieving the most cost effective solutions, it revealed some rather useful findings. Most notably, that it is cheaper to over-build generation capacity to a point where there is excess supply on sunny or windy days, and still an adequate direct supply when demand is high but wind or sun are in short supply. Storage was still an important part of the puzzle however, as Science Daily explains:


During the hours when there was not enough renewable electricity to meet power needs, the model drew from storage and, on the rare hours with neither renewable electricity or stored power, then fossil fuel. When there was more renewable energy generated than needed, the model would first fill storage, use the remaining to replace natural gas for heating homes and businesses and only after those, let the excess go to waste.

The study used cost estimates for renewables in 2030, that showed wind and solar at roughly half the installation price they are today, with maintenance costs remaining roughly constant. As far as I can tell, it didn't even get into the potential for radical energy and resource savings through ideas like embracing bright green cities or dematerializing the economy either.

Having just got into a heated twitter "discussion" with another naysayer who feels that fracking to avoid economic calamity is our only option, I must once again call BS. More

 

Tuesday, October 2, 2012

Liquid air 'offers energy storage hope'

Turning air into liquid may offer a solution to one of the great challenges in engineering - how to store energy.

The Institution of Mechanical Engineers says liquid air can compete with batteries and hydrogen to store excess energy generated from renewables.

IMechE says "wrong-time" electricity generated by wind farms at night can be used to chill air to a cryogenic state at a distant location.

When demand increases, the air can be warmed to drive a turbine.

Engineers say the process to produce "right-time" electricity can achieve an efficiency of up to 70%.

IMechE is holding a conference today to discuss new ideas on how using "cryo-power" can benefit the low-carbon economy.

The technology was originally developed by Peter Dearman, a garage inventor in Hertfordshire, to power vehicles.

A new firm, Highview Power Storage, was created to transfer Mr Dearman's technology to a system that can store energy to be used on the power grid.

The process, part-funded by the government, has now been trialled for two years at the back of a power station in Slough, Buckinghamshire. More

 

Tuesday, August 28, 2012

Salt-and-water battery could help plug renewables gap

Australian researchers have developed a sodium-ion-based battery which, they say, has the potential to solve one of sustainable energy’s greatest challenges – storing energy cheaply ‘offline’ after it has been generated.

Dr Manickam Minakshi and Dr Danielle Meyrick from Western Australia’s Murdoch University point out that, while the efficiency of wind and solar technologies has improved rapidly, the problem of storage has yet to be solved.

‘The central obstacle facing sustainable energy is unreliability. Wind turbines don’t turn on a still day. Solar doesn’t work at night and can be hampered in the day by cloud, dust or snow coverage,’ Dr Minakshi said.

‘To provide power at non-generation times, excess energy needs to be stored in batteries, but storage technologies now being considered, such as molten salt or molten sulfur, work at high temperatures, making them expensive and impractical.

‘Our water-based sodium-ion battery has shown excellent potential for affordable, low-temperature storage.’

Dr Minakshi said he was drawn to sodium because its chemical properties were similar to lithium, the element that powers most portable electronic devices. While lithium ion batteries are common in today’s consumer electronics, they require inbuilt safety mechanisms that can affect efficiency; as well, lithium batteries tend to fail after a few years.

The Murdoch University researchers say the main challenge they faced in developing a sodium-ion battery was finding cathode and anode materials capable of accommodating sodium’s ionic size – which is 2.5 times larger than that of lithium.

‘Ions travel out of the cathode and into the anode to form a current. As an imperfect analogy, you can think of [electrodes] as mesh filters that ions pass through. We had to find materials with larger gaps in their mesh,’ Dr Minakshi said.

After testing various metals and phosphates, Dr Minakshi’s team eventually found success with manganese dioxide as the cathode and a novel olivine sodium phosphate as the anode. The result is a safe, cost-effective battery with high energy density. More

 

Sunday, August 26, 2012

Making clean energy pay off by storing it as squeezed air

A stumbling block to increasing our reliance on electricity from cleaner energy sources such as solar panels and wind farms has always been figuring out how to efficiently store the energy for use when the wind isn’t blowing and the sun isn’t shining. Danielle Fong could make clean energy significantly more practical on a large scale by introducing a novel way to use tanks of compressed air for energy storage. “It could radically reorient the economics of renewable energy,” she says.

Danielle Fong
The idea of using compressed air to store energy is not new. Electricity from solar panels or wind turbines can turn a motor that’s used to compress the air in a large tank, and the air pressure can then be converted into power to drive a generator when the power is needed. The problem is that during compression the air reaches temperatures of almost 1,000 °C. That means energy is lost in the form of heat, and storage in conventional steel vessels becomes impractical.

Fong stumbled on a possible solution while skimming through a nearly century-old book: water spray is great at cooling air. She asked, why not spray water into the air while compressing it, so that the air stays cool? To make the process practical, she developed a technique for separating the heated water from the compressed air and diverting the water into a tank, so the heat can be recaptured to minimize energy loss. The process is about as efficient as the best batteries: for every 10 kilowatt-hours of electricity that goes into the system, seven kilowatt-hours can be used when needed.

Fong founded a company called LightSail Energy in Berkeley, California, to develop the technology. Initially, she planned to produce compressed-air-powered scooters. But backer Vinod Khosla of the venture capital firm Khosla Ventures convinced her to go after the much bigger market of electricity for the power grid.

Batteries are the current state of the art in storing excess wind and solar energy, but Fong says the LightSail system will cost less to purchase and will last for a decade or more. Over the long term, she says, the system could cost as little as one-tenth as much to own and operate as batteries do. A single system, which is about the size of a shipping container plus a car-size unit, will store the energy generated by a one-megawatt wind turbine running for three hours. More

 

Saturday, August 18, 2012

As Smart Electric Grid Evolves, Engineers Show How to Include Solar Technologies

ScienceDaily (Aug. 17, 2012) — An economically feasible way to store solar energy in existing residential power networks is the subject of an award winning paper written by two Virginia Tech electrical engineers and presented at an international conference.

Reza Arghandeh of Blacksburg, Va., a doctoral candidate in the Bradley Department of Electrical and Computer Engineering at Virginia Tech, won the best student paper award at the 20th International Conference on Nuclear Engineering, held in conjunction with the American Society of Mechanical Engineering Power 2012 Conference at Anaheim, Calif.. His advisor is Robert Broadwater, professor of electrical and computer engineering, who specializes in electric power system analysis and design.

In their paper, they acknowledge that solar energy resources are "intermittent, seasonal, and non-dispatchable." However, the current national climate with its deregulation policies, electricity tariffs, control strategies and demand management are "significant tools for flexible and resilient operation of power systems with photovoltaic adoption levels," Arghandeh argued.

"Selling the household generated electricity into the electric energy market and the storage of electricity in storage systems and demand control systems provide a variety of economic opportunities for customers and utility companies to use more renewable resources," he added.

Some residential houses are already doing just this -- selling power back to an electrical distribution industry. But Arghandeh and Broadwater's work provides an optimization algorithm for a Distributed Energy Storage (DES) system on a broad scale. The system they developed presents a fleet of batteries connected to distribution transformers. The storage system can then be used for withholding distributed photovoltaic power before it is bid to market, Arghandeh explained.

"Withholding distributed photovoltaic power, probably gained from rooftop panels, represents a gaming method to realize higher revenues due to the time varying cost of electricity," he said.

Arghandeh is referring to the peak usage of energy systems such as the early evening hours when families return home from school and from work versus the low usage times that occur in the early morning hours when most households are asleep. "The distributed photovoltaic power adoption can be controlled with the help of real-time electricity price and load profile," he confirmed. More

 

Tuesday, July 24, 2012

Reducing CO2: Research Shows Chemical and Economic Feasibility for Capturing Carbon Dioxide Directly from Air

ScienceDaily (July 23, 2012) — With a series of papers published in chemistry and chemical engineering journals, researchers from the Georgia Institute of Technology have advanced the case for extracting carbon dioxide directly from the air using newly-developed adsorbent materials.

The technique might initially be used to supply carbon dioxide for such industrial applications as fuel production from algae or enhanced oil recovery. But the method could later be used to supplement the capture of CO2 from power plant flue gases as part of efforts to reduce concentrations of the atmospheric warming chemical.

In a detailed economic feasibility study, the researchers projected that a CO2 removal unit the size of an ocean shipping container could extract approximately a thousand tons of the gas per year with operating costs of approximately $100 per ton. The researchers also reported on advances in adsorbent materials for selectively capturing carbon dioxide.

"Even if we removed CO2 from all the flue gas, we'd still only get a portion of the carbon dioxide emitted each year," noted David Sholl, a professor in Georgia Tech's School of Chemical & Biomolecular Engineering. "If we want to make deep cuts in emissions, we'll have to do more -- and air capture is one option for doing that."

The Georgia Tech research into air capture techniques was funded by the U.S. Department of Energy. Papers describing the economic analysis and new adsorbent materials were published in the journals ChemSusChem, Industrial and Engineering Chemistry Research, the Journal of Physical Chemistry Letters and the Journal of the American Chemical Society.

Carbon dioxide from large sources such as coal-burning power plants or chemical facilities account for less than half the worldwide emissions of the gas, noted Christopher Jones, also a professor in the Georgia Tech School of Chemical & Biomolecular Engineering. Much of the remaining emissions come from mobile sources such as buses, cars, planes and ships, where capture would be much more costly per ton. More

 

Tuesday, June 12, 2012

The new hotness in energy storage: gravel

Can a humble system of gravel and a heat pump provide a breakthrough for utility-scale energy storage? British startupIsentropic thinks so, and this week announced that they’ve raised $22 million in project funding and an equity investment from the Energy Technologies Institute (ETI), a collaboration between the U.K. government and companies in the energy industry.

I covered Isentropic back in 2009, and back then the company was looking for a $5 million Series B round. The five-year-old company, previously raised a Series A round from Credit Suisse Securities Europe and won a £250,000 ($380,112) research grant from The Carbon Trust.

The innovation behind Isentropic’s idea is an advanced heat pump connected to a super simple, low cost energy storage design. Heat pumps are basically engines that can work in reverse and Isentropic’s device can store and release energy when needed. Founders and engineers Jon Howes and James Macnaghten developed the design of the heat pump a decade ago, and then brought on Mark Wagner as chairman to help with business direction.

An isentropic process (hence the name) is a thermodynamic process that can be reversed. Chairman Mark Wagner told me back in 2009 that the key to the company’s heat pump is that it can be reversed extremely efficiently, and has an isentropic efficiency (reversible efficiency) of 99 percent. More